IDT74FCT3807APYG8 Overview

The clock divider is available in SSOP case. There is a Cut Tape (CT) package attached to it. It is normal to operate with a value of 100MHz. A total of 20 terminations are present. Supply voltages of 3.3V enable high efficiency. This item is positioned in the way of Surface Mount. There is a pin count of 20 on timeing clock. The 20 pins are used for operation. The cut smart buffer you are looking for is contained within Clock Drivers. A minimum working temperature of 0°C is required to maintain its reliability. 70°C is the maximum operating temperature required for stable operation. There is an electronic gadget called FCT in this family. There is 3.6V maximum supply voltage (Vsup). A logic IC with a value of LOW SKEW CLOCK DRIVER is used. The supply voltage (Vsup) should be maintained above 3V in order for the clock divider to operate normally. A 3.3V volt supply powers it. It is possible to obtain 10 true outputs. As a result of using this gadget, you will also be able to obtain MAX PART TO PART SKEW = 0.75NS.

IDT74FCT3807APYG8 Features

20 terminations
Clock Drivers subcategory
logic IC type of LOW SKEW CLOCK DRIVER

IDT74FCT3807APYG8 Applications

There are a lot of Integrated Device Technology (IDT)
IDT74FCT3807APYG8 Clock Buffers & Drivers applications.

• Machine made
• Clock signal duplication
• Clock signal format conversion
• Clock signal level shifting
• High performance communication system
• Data center
• Cloud computing
• Network
• High speed industry
• High-end consumer electronics