EL5105IWZ-T7 Overview

It is packaged in an SOT-23-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 3mV for input offset voltage. A supply current of 9.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 65dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 12V. It is important to keep in mind that the power supply voltage of this electric component is below 10V, which is suitable. Keeping the linear amplifier's supply voltage above 4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6.6V volts. The VIDEO AMPLIFIER value can be used to sort the electronic part by its consumer IC type.

EL5105IWZ-T7 Features

5 Pins
65dB voltage gain

EL5105IWZ-T7 Applications

There are a lot of Intersil (Renesas Electronics America)
EL5105IWZ-T7 Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering