INA111APG4 Overview

Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Buffer amps of this type are called Instrumentation-types. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 200μV. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.3mA and 10 . There should be no change in the voltage gain. The buffer amp consists of 1 circuits in total. The total number of elements in this buffer amplifier is 3. There is an 3.3mA quiescent current running through op amp ic. 10 TΩ is the range in which the op amp resistance should lie.

INA111APG4 Features

8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10 TΩ

INA111APG4 Applications

There are a lot of Texas Instruments INA111APG4 Instrumentational OP Amps applications.

• Band-pass filter
• Vehicle electronics
• Division circuits
• Radar
• Non-polarized electrodes
• Video computer boards
• Blood pressure sensors
• High speed sample
• PDA
• Power transmission