EL5205IYZ-T7 Overview

In the package, you will find a MSOP-case to contain the op amp ic. A Cut Tape case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. Using an 9.5mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 65dB for the time being. On the buffer amps, there are 2 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 12V. This electric component can work from a voltage of under 13.2V as far as supply voltage is concerned. A voltage of 4V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 6.6V volts when you conduct this part. Using the VIDEO AMPLIFIER column, it is possible to sort by the consumer IC type of the electronic ic chip.

EL5205IYZ-T7 Features

65dB voltage gain

EL5205IYZ-T7 Applications

There are a lot of Intersil (Renesas Electronics America)
EL5205IYZ-T7 Instrumentational OP Amps applications.

• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation
• Video computer boards