EL5324IREZ-T7 Overview
In the package, you will find a HTSSOP EP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the BUFFER-type. During the past two weeks, there have been close to 28 terminations. A total of 28 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 28 pins on it. Op amp rates 2mV as input offset voltage. Using an 7.8mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 0.069dB for the time being. On the buffer amps, there are 10 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. This electric component can work from a voltage of under 18V as far as supply voltage is concerned. A voltage of 4.5V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 8.25V volts when you conduct this part.
EL5324IREZ-T7 Features
28 Pins
supply voltage of 15V
0.069dB voltage gain
EL5324IREZ-T7 Applications
There are a lot of Intersil (Renesas Electronics America)
EL5324IREZ-T7 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
