There is a Non-Volatile memory type associated with this device. In addition, memory ics is available in a Tape & Reel (TR) case as well. As you can see, it is embedded in 8-SOIC (0.154, 3.90mm Width) case. This chip has an 4Mb 512K x 8 size of memory on it, so a lot of data can be stored on it. As with most mainstream devices, this one uses FLASH-format memory. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~105°C TA. The device is capable of handling a supply voltage of 2.3V~3.6V. It is recommended that the mounting type be Surface Mount. It is important to note that the memory has a clock frequency rotation within the range of 100MHz. An 8-pin package is used to package this memory device. According to the datasheet, this memory chip operates at an operating voltage of 3.3V. There must not be a minimum operating temperature of less than -40°C for this device. It should not be operated above 105°C°C. Ideally, this part should be supplied with a voltage of at least 2.3V. Its operating voltage shall not exceed 3.6V. The frequency of data processing on this memory chip is 100MHz. An 100MHz maximum frequency can be reached by the memory when running at its maximum frequency. A maximum current of 15mA can be used to run it.