IS42S81600E-7TLI-TR Overview

There is a memory type Volatile for this type of device. You can get memory ics in a Tape & Reel (TR) case. Embedded in the 54-TSOP (0.400, 10.16mm Width) case, memory ics is a single file. There is an 128Mb 16M x 8 memory capacity on the chip. There is a mainstream memory format used by this device, which is called DRAM-format memory. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. It is supplied votage within 3V~3.6V. As far as the mounting type is concerned, Surface Mount is recommended. In this memory, the clock frequency rotation is within an 143MHz range. In this ic memory chip, there is an 54-pin package that encloses the device. There is a note stating that this memory chip operates at 3.3V. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. It is rated 130mA for its nominal supply current when it comes to the memory component. In order for this device to function properly, its operating temperature must not be less than -40°C. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 85°Cc, otherwise, damage could be done to it. This memory ics requires a minimum voltage of 3V. This part requires a minimum voltage of 3.6V. Using this memory chip, you will be able to process data at a speed of 143MHz times per second. It is possible to run this memory at a maximum frequency of up to 143MHz. The maximum current it can handle is 130mA.

IS42S81600E-7TLI-TR Features

Package / Case: 54-TSOP (0.400, 10.16mm Width)
54 Pins
Operating Supply Voltage:3.3V
Freguency at 143MHz
143MHz terminals

IS42S81600E-7TLI-TR Applications

There are a lot of ISSI, Integrated Silicon Solution Inc IS42S81600E-7TLI-TR Memory applications.

• printers
• cell phones
• networks
• networking
• Camcorders
• workstations,
• DVD disk buffer
• hard disk drive (HDD)
• telecommunications
• personal digital assistants