IS42SM16160K-75BLI Overview

Volatile is its memory type. It is supplied votage within Tray. As you can see, it is embedded in 54-TFBGA case. It is estimated that the memory size on the chip is 256Mb 16M x 16. There is a DRAM-format memory used in this device, which is the memory format used by mainstream devices. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. A voltage of 2.7V~3.6V is possible to be applied to the supply. As far as the mounting type is concerned, Surface Mount is recommended. A total of 54 terminations have been planted on the chip. The comprehensive working procedure is supported by 1 functions in this part. An 3.3V supply is required for this ic memory chip to operate properly. It has a clock frequency of 133MHz. The memory device is enclosed in a package with an 54-pin connector. This memory runs on an 3.3V operating supply voltage. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. In terms of its nominal supply current, this memory component is rated at 100mA. Despite all its merits, this chip also features PROGRAMMABLE CAS LATENCY; AUTO/SELF REFRESH to boost system performance. In this chip, there are 1 ports providing read and/or write access to one memory address. I/O port addresses on this device are mapped to memory addresses of COMMON bits.

IS42SM16160K-75BLI Features

Package / Case: 54-TFBGA
54 Pins
Operating Supply Voltage:3.3V
Additional Feature:PROGRAMMABLE CAS LATENCY; AUTO/SELF REFRESH
I/O Type: COMMON

IS42SM16160K-75BLI Applications

There are a lot of ISSI, Integrated Silicon Solution Inc IS42SM16160K-75BLI Memory applications.

• hard disk drive (HDD)
• telecommunications
• nonvolatile BIOS memory
• eDRAM
• workstations,
• data buffer
• embedded logic
• mainframes
• networking
• main computer memory