LIA101 Overview
The linear amplifier is packaged in a 16-DIP (0.300, 7.62mm) case. Buffer amps of this type are called Isolation-types. The case in which buffer amplifier is delivered is called a Tube case. There are 16 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. Through Hole is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 5mA . The buffer amp consists of 2 circuits in total. Buffer op amp is equipped with 2 channels on the device. The temperature should not be lower than -40°C for operational amplifier ics to operate. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. As a recommendation, this electronic component should be used with a power supply that can deliver 5mA. It is important to keep in mind that the power supply voltage of this electric component is below 18V, which is suitable. A voltage of 5V or higher is recommended for the linear amplifier's supply voltage.
LIA101 Features
LIA101 Applications
There are a lot of IXYS Integrated Circuits Division LIA101 Instrumentational OP Amps applications.
- Professional videography
- High/low-pass filter circuit
- Portable docking station
- Television
- Portable electronic products powered by batteries
- Computer workstations
- Oscilloscopes
- Instrumentation
- Exponential operation circuits
- Signal amplification
