INA117PG4 Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. A Differential-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 1mV. For this electronic part, it is recommended that you mount it with type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 1.5mA . The voltage gain should stay at 0dB. A voltage rating of 1 is indicated for the op amp's operating supply voltage. As a result, linear amplifier's quiescent current is 2mA. 800kOhm is the range in which the instrumentation amplifier resistance should lie.
INA117PG4 Features
8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 800kOhm
INA117PG4 Applications
There are a lot of Texas Instruments INA117PG4 Instrumentational OP Amps applications.
- pH (acidity)
- Radar
- Medical imaging
- Fission chambers
- Mobile phone
- Multiplication circuits
- Displayers for aircraft and air transportation control systems
- Inverse/same-phase proportional circuit
- ECG equipment
- Comparator
