MX841BETR Overview

In order to save board space, the led driver uses the 8-SOIC (0.154, 3.90mm Width) package. These LED drivers have 1 outputs.We are using Surface Mount as the mounting method.When it emerges as a DC DC Regulator, it shows high-performance and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight provides many benefits.As a result, it operates based on the frequency of 1MHz.In this case, there are 8 terminations.There are 8 pins used to form the base of its configuration.It is likely that undetermined failures will occur if the voltage supply is less than 1.1V.There are 3 segments in it.There is a device mounted on the Surface Mount.The LED driver can be found under the base part number MX841.It is acceptable to operate with a supply voltage of 5.5V.20V is the voltage output.There are 8 pins on this device.To meet highest efficiency standards, it works on a supply voltage of 1.1V.A circuit operated by the device has 3V volts.2A is the maximum output current.

MX841BETR Features

Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz

MX841BETR Applications

There are a lot of IXYS Integrated Circuits Division MX841BETR LED Driver ICs applications.

• Scanners and Handy Terminals
• Flicker-free LED Lighting using R1580N
• Sports Facility Lighting
• Architectural lighting
• Auxiliary lights for on-vehicle cameras
• Gallery lighting
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Constant Voltage Power Source for portable equipment
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• General lighting