LC4032C-75TN44C Overview

Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].It is equipped with 30I/O ports.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 1.8V is used to power it.It is a part of family [0].Trayshould be used to package the chip.Ensure its reliability by operating at [0].Surface Mountshould be used for mounting the chip.As part of the ispMACH? 4000Cseries, it is a type of FPGA.The chip is programmed with 44 pins.It is also possible to find YESwhen using this device.Its related parts can be found in the [0].In digital circuits, 800gates serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].EEPROM is adopted for storing data.In this case, Surface Mountis used to mount the electronic component.It is designed with 44 pins.In this case, the maximum supply voltage is 1.95V.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.There are a total of 2 logic elements or blocks.Programmable I/Os are counted up 128.This can be achieved at a frequency of 178.57MHz.To detect input signals, there are 2 dedicated inputs.An elementary building block consists of 36logic elements/cells.

LC4032C-75TN44C Features

44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins

LC4032C-75TN44C Applications

There are a lot of Lattice Semiconductor Corporation LC4032C-75TN44C CPLDs applications.

• INTERRUPT SYSTEM
• STANDARD SERIAL INTERFACE UART
• Timing control
• Address decoders
• Programmable power management
• USB Bus
• Programmable polarity
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• High speed graphics processing
• Preset swapping