LT1057CH Overview

In order to protect the op amps, a TO-205-8, TO-5-8 Metal Can case is used. Op amps are J-FET types of amplifier on the chip. There is a Bulk case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The mounting type that is recommended for this electrical part is Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. On this buffer amplifier, there are 2 circuits. In order to ensure optimal performance, an 1.7mA supply is recommended for this electrical component. There are a maximum of 50000 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.

LT1057CH Features

8 Pins
supply voltage of 15V

LT1057CH Applications

There are a lot of Linear Technology/Analog Devices LT1057CH Instrumentational OP Amps applications.

• Radiation thermometry transducers
• Computer workstations
• Inverse/same-phase proportional circuit
• Power generator
• Television broadcasting equipment
• Weighing systems
• Thermocouples
• Video conversion and routing
• Precision measurement
• Band-pass filter