LT3757MPMSE#TRPBF Overview

It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 2.9V~40V are the dc control's supply voltage and operating voltage, respectively. A -55°C~150°C TJ dc switcher is not a problem. Switching can be done at 100kHz~1MHz with this switching controller. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. The 10 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 24V. Search for "LT3757" to find other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 2.9V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 7.2V voltage. Voltages 40V are the maximum that the dc to dc regulator will accept.

LT3757MPMSE#TRPBF Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION

LT3757MPMSE#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LT3757MPMSE#TRPBF DC to DC converter applications.

• Mobile phones
• Large fire protection systems
• Combined machine tools
• Alternators
• Series voltage regulation circuits
• Computer monitoring equipment of building
• Precision electronic equipment
• Access control systems
• Analog precision reference circuits
• Digital precision reference circuits