LTC1232CS8#PBF Overview

It is mounted through 8 terminals on the power management. In terms of packaging, power management follows the Tube model. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 4.5V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Open Drain, Open Drain. Power management is also possible to add other features such as PUSH-BUTTON RESET to name a few. A similar IC managements number of the manufacturer can always be found by using LTC1232, the base power ics number. The power management must be powered by 5V volts to function properly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 2mA.

LTC1232CS8#PBF Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V

LTC1232CS8#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC1232CS8#PBF Voltage Supervisors applications.

• Radio
• Embedded computing
• Microprocessor system
• DSP
• Network equipment
• Dash board
• Detection of phase loss
• Sensitive sensors
• WiFi router
• Fire equipment power monitoring system