LTC1391IS#PBF Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, you'll find this switch device. 8:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. A 8 channel electronic part produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An injection of 16 pins is performed into the body of the electrical component. A 1 circuit is present in this switch device. Use LTC1391 to search for variants of the digital switches. As far as internal resistance is concerned, it has 300Ohm. You can find the functions of the 16 pins in the datasheets. A cost-effective Dual, Single supply type analogue multiplexer. 200nA current would be enough for this multiplexer to operate. If put voltage greater than 40μA on the device, damage may be caused to the analogue multiplexer. If put voltage greater than 7.5V on the multiplexer, damage may be caused to the device. It can operate from 2.7V operating voltages. The electrical component supports 8 inputs.

LTC1391IS#PBF Features

8 Channels
200nA Supply Current

LTC1391IS#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC1391IS#PBF Analog Switches & Multiplexers ICs applications.

• 65 V DACs
• Battery Powered Instruments
• ISDN NT1/TA
• High-Voltage
• Remote wireless modules
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• CSU
• Battery Powered Systems
• Multi-Line E1 Interface Cards
• PBXs