LTC1702CGN#PBF Overview

With its 24-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For 2 outputs, the dc motor controller is appropriate. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 3V~7V. Worked in a 0°C~70°C TA dc switcher before. This switching controller can switch at 550kHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Current Limit, Enable, Power Good, Soft Start. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 24 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. Searching "LTC1702" will return other relevant dc to dc converter ics. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 3V. Voltages 7V are the maximum that the dc to dc regulator will accept. 5A is the greatest value switching converter outputs as current.

LTC1702CGN#PBF Features

Transistor Driver Outputs
Switching Frequency: 550kHz
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION

LTC1702CGN#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC1702CGN#PBF DC to DC converter applications.

• Automatic plug-in machines
• Precision electronic equipment
• Lathes
• Alternators
• Flaw detection equipment
• CMM
• Remotely powered electric motors
• Hydrogen power
• Hydro power
• Computed tomography (CT)