UCC2813PWTR-5 Overview

It comes in the 8-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 3.6V~12V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 8 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. A search for "UCC2813" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 8. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 4V is the minimum required for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 1V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. A frequency of 1MHz is set for the switching controller. There must be a voltage supply of 10V volts. 30mA more than 30mA current should be supplied to the controller. When this switching controller is running at frequency 1MHz, it can perform well in most cases.

UCC2813PWTR-5 Features

Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz

UCC2813PWTR-5 Applications

There are a lot of Texas Instruments UCC2813PWTR-5 DC to DC converter applications.

• Computed tomography (CT)
• Energy management systems
• Smoke prevention equipment
• Hydraulic presses
• Linear guide
• USB circuits
• Gear/thread machining machines
• Constant current circuits
• PSRR circuits
• Servo drive system