LTC1760CFW#PBF Overview

There is a package for Tube in which it can be found.We've included it in the 48-TFSOP (0.240, 6.10mm Width) package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to 0°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number LTC1760 can be found by following the order of the base part number.It contains a total of 48 terminations.It is equipped with 48 pins.As long as it is charged at maximum current, it will be rated as 4.28A.It requires pins 48 to function.The number of available channels is 2.It should be able to run off a battery of 20V.In order for the device to operate properly, the supply voltage should not exceed 28V.When the output voltage is 5.2V, high efficiency is possible.In this case, the output current of the device is set to 4A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 0V is suitable for it, because it can operate with a low supply voltage.A minimum input voltage of 6V volts is required for this device.Input voltage is limited to 28V volts.As a maximum output supply voltage for this operation, the voltage must be set to 5.5V.In the course of operation, the maximum output current is reduced to 2mA.

LTC1760CFW#PBF Features

2 channels
Power Management Circuits subcategory
48-TFSOP (0.240, 6.10mm Width) package

LTC1760CFW#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC1760CFW#PBF Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift