LTC3716EG#PBF Overview

It comes in a 36-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 2. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4V~36V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 140kHz~310kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 36 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PHASE-SHIFT CONTROL. DC switcher's input voltageis 15V volts. In addition to "LTC3716", there are other relevant dc to dc converter ics you can find. In total, switching converter has 36 pins. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 3.6V. Test statistics indicate DC regulator outputs 36V voltage. The dc to dc regulator is limited to 30V input voltage. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. Switching controller operates at a frequency of 300kHz. There are 1 channels for high-quality communication. If the current flow input is 1.2mA, the switching converter could operate.

LTC3716EG#PBF Features

Transistor Driver Outputs
Switching Frequency: 140kHz~310kHz
Enable, Power Good, Soft Start
PHASE-SHIFT CONTROL
Frequency: 300kHz

LTC3716EG#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3716EG#PBF DC to DC converter applications.

• Wind power
• Experimental setup
• Geothermal power
• Cutting machine tools
• Arc suppression circuits
• Electric water heaters
• Computer-related products
• Program control systems
• Scientific testing
• Adjustable voltage or current linear circuits