LTC3830EGN#PBF Overview

It comes in a 16-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 3V~8V volts and has 3V~8V supply voltage. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller can be switched at 200kHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. A variety of 16 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "LTC3830". The switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 3V. The test statistics indicate that DC regulator outputs a voltage of 7.28V. It should be fully noted that the dc to dc regulator only accepts 8V input voltage at most. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 95 % during power-up and power-down. There is a maximum frequency of 250kHz on this dc regulators. With this controller, the phase is 1.

LTC3830EGN#PBF Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %

LTC3830EGN#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3830EGN#PBF DC to DC converter applications.

• Domestic water pumps
• Automation technology
• Cutting machine tools
• Boring machines
• Correction machines
• Digital video recorders
• Nuclear power plants
• Low output voltage switching power supply circuits
• Gear/thread machining machines
• Combined machine tools