LTC3834EFE#PBF Overview
With its 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4V~36V and has a 4V~36V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 250kHz~530kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Phase Control, Power Good, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 20 terminations can be used for a wide range of dc switching. A DC switcher's nominal voltage of 12V is input. Searching "LTC3834" will return other relevant dc to dc converter ics. 20 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 10V. If you are starting a new project, you should note the dc dc regulator's typical output current is 3A. Switching controllers work at 530kHz Hz. In order to ensure the dc switcher's functionality, users must limit the voltage to 36V due to the dc switcher's maximum input voltage. Datasheets state the switching converter can output up to 10V volts. At least 800mV voltage is output by the voltage controller.
LTC3834EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Phase Control, Power Good, Soft Start, Tracking
Frequency: 530kHz
LTC3834EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC3834EFE#PBF DC to DC converter applications.
- Ball screw pair
-
- Computer application technology
-
- Network technology
-
- Automation technology
-
- CMM
-
- Various precision measuring instruments
-
- Various precision measuring detectors
-
- Flaw detection equipment
-
- Balance equipment
-
- Industrial robots
-
