LTC3850EGN#PBF Overview

Capsuled in the 28-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. Tube is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~24V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 250kHz~780kHz position. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. 28 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. You can find other relevant dc to dc converter ics by searching "LTC3850". Pins number 28 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. 4V should be the minimum input voltage for the dc dc voltage regulator. A 23.32V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. DC regulator has a maximum frequency of 860kHz. In order to ensure high-quality communication, there are 1 channels available.

LTC3850EGN#PBF Features

Transistor Driver Outputs
Switching Frequency: 250kHz~780kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION

LTC3850EGN#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3850EGN#PBF DC to DC converter applications.

• Surge protection circuits
• Linear guide
• Flexible manufacturing cells
• Arc suppression circuits
• Surface processing equipment
• Computed tomography (CT)
• Access control systems
• Printing
• Industrial robots
• Medical equipment