LTC3851AIMSE#PBF Overview

With its 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. 4V~38V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. In this switching controller, the switch can be set to 235kHz~750kHz. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Soft Start, Tracking provides dcdc regulator efficient switching control. A SWITCHING REGULATOR analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . The 16 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. Other relevant dc to dc converter ics can be found by searching "LTC3851". Total pins of switching converter are 16. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 4V is the minimum required for the dc dc voltage regulator. Statistically, the DC regulator outputs 5.5V voltage. This dc to dc regulator accepts only 38V input voltage at most. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. DC regulator's maximum frequency is 810kHz. DC to DC voltage regulator has the value of ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V to better satisfy the requirement.

LTC3851AIMSE#PBF Features

Transistor Driver Outputs
Switching Frequency: 235kHz~750kHz
Current Limit, Enable, Frequency Control, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V

LTC3851AIMSE#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3851AIMSE#PBF DC to DC converter applications.

• USB circuits
• seismic instrument power circuits
• Servo drive system
• Domestic water pumps
• Planers
• Electrical power transmission
• Imported equipment
• Industrial controllers
• Hydrogen power
• Bending machines