LTC3862IGN#TRPBF Overview

The switching controller fits in the 24-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. For outputs of 2, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 4V~36V volts and has 4V~36V supply voltage. Worked in an dc switcher with a -40°C~125°C TJ rating. Switching can be done at 75kHz~500kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Soft Start. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 24. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "LTC3862", there are other relevant dc to dc converter ics you can find. There are only 24 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. 4V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 200V. A maximum voltage of 36V is accepted by the dc to dc regulator as an input voltage. The max frequency of the pmic can reach 500kHz. Channels are 1 for high-quality communication.

LTC3862IGN#TRPBF Features

Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION

LTC3862IGN#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LTC3862IGN#TRPBF DC to DC converter applications.

• Digital display device
• Computer monitoring equipment of building
• Driver circuits
• Handheld GPS
• Correction machines
• Elevator lighting
• Electric heating, lighting
• Combined machine tools
• Planers
• Computed tomography (CT)