LTC4210-2CS6#TRMPBF Overview
This is included in the SOT-23-6 Thin, TSOT-23-6 package.At present, 1 channels are available.It's packaged in a Cut Tape (CT) shape.Total terminations are 6.Device position DUAL is its terminal position.In total, there are 6 pins on it.A supply voltage of 5V can result in high efficiency.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to 0°C~70°C.Application General Purpose is available on the device.As you can see in Latched Fault, it's featured.The device should be able to be powered by a 2.7V~16.5VV power source.There are numbers in the LTC4210 family that include it.6 pins are used in operation.There are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.In the present, there is a shortage of 650μA.Hot-swappable device is important that the supply voltage (Vsup) is kept above 2.7V for normal operation of the device.Hot Swap can operate at a maximum supply current of 3.5mA.5V output voltage enables high efficiency.
LTC4210-2CS6#TRMPBF Features
The terminal position of 6
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 5V
LTC4210-2CS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices
LTC4210-2CS6#TRMPBF hot swap controllers applications.
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
- Loads
-
- Distributed power systems
-
- Redundant negative voltage supplies
-
