LTC4217IFE#PBF Overview
In the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 20 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 20 pins.The supply voltage 12V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Monitor.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Thermal Limit describes it.Using a 2.9V~26.5VV power source should be able to power the device.The LTC4217 family includes it.During operation, 20 pins are used.Hot-swappable device has Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO programmable features.Presently, there is a sufficient supply of 1.6mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.9V so that the device can function normally.Vsup is set to 26.5V, the maximum supply voltage.The maximum supply current it requires to operate is 3mA.Device 2AV has a maximum output.
LTC4217IFE#PBF Features
The terminal position of 20
Features of Thermal Limit
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO
LTC4217IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC4217IFE#PBF hot swap controllers applications.
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
- Loads
-
- Distributed power systems
-
- Redundant negative voltage supplies
-
- Central office switching systems
-
