LTC4313IDD-2#PBF Overview

Packaged in 8-WFDFN Exposed Pad, power buffer can be easily transported.As of right now, this power buffer can be shipped in Tube packages.Surface Mount universial mout for easy adapting.This is one of the most common type of Buffer, Accelerator that can be found.For its operation, this op amp buffer uses a voltage of 2.9V~5.5V.The output quality is maintained by collaborating between 1 channels.Input of 2-Wire Bus is enabled by it.Setting the operating temperature to -40°C~85°C will prevent malfunctions.Operational amplifier buffers like this are designed to target applications like I2C - Hotswap and others.It is possible to search with "LTC4313" to get more pin-to-pin solutions for your special requirements if you are looking for some.A 8 terminal can be found on the op amp buffer.Reflow temperature is NOT SPECIFIED at its peak.When powered by 3.3V voltage, this splitter is capable of carrying out a number of demanding tasks.Taking the Power buffer's pinout as an example, it starts from the 8 pins it has on its surface.2-Wire Bus is what it outputs as the output format.OP amp buffers 8.1mA.In order to keep the repeter functioning, you cannot feed it voltage higher than 5.5V.A minimum of 2.9V is required for the splitter to start.

LTC4313IDD-2#PBF Features

1 channels.
Mainly used in I2C - Hotswap.

LTC4313IDD-2#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4313IDD-2#PBF Signal Buffers, Repeaters, Splitters applications.

• Industrial/Embedded PC
• Multidrop Buses
• Medical
• Communications Switchers
• Network Switches/Routers
• Laptop Computers (for External Video Cards)
• Network Switches/Routers
• Add/Drop Muxes
• Cable Repeaters
• Servers