78M6610+PSU/C09T Overview

This package is packed in Tape & Reel (TR). A package called 16-TSSOP (0.173, 4.40mm Width). An example of its use as a Single Phase meter would be the following. This item is available in Surface Mount. As a result of -40°C~85°C, a higher operational temperature is reached. Using a 3V~3.6V power supply, it operates as it should. It has a voltage of 0.5V 0.8V for its low-level I/O ports in this PMIC. This device is capable of delivering voltages of 0.6V 2V for high-level I/Os on its pins. This is a 16-switched solution that can be used for logic gate applications. With its Surface Mount design, it can be easily installed and dismounted and can be used for many projects. The maximum supply current is recommended to be set at 8.1mA in order to make sure the PMIC keeps running normally. 3.3V can be used to provide power to this device. In order for this device to work, it must work at a frequency of up to 20MHz. The PMIC in this case has a memory size 8kB embedded in it. As far as memory management is concerned, the PMIC uses FLASH memory.

78M6610+PSU/C09T Features

Single Phase meter.
Operating maximum frequency: 20MHz.
8kB adequate size for target applications.
FLASH memory.

78M6610+PSU/C09T Applications

There are a lot of Maxim Integrated
78M6610+PSU/C09T Energy Metering ICs applications.

• Intelligent Power Distribution Units
• Telecom Infrastructure
• Industrial Equipment
• General Purpose Energy Measurement
• Power monitoring/power budgeting
• Central office equipment
• Telecommunications and data communications equipment
• PCs/servers
• Power monitoring instruments
• Poly-phase energy meters of class 0.5S and class 1