DG202CSE+T Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. There is an electrical component included in the 16 series. Multiplexers built on a SPST - NO switching circuit are built. The circuits in this analogue multiplexer number 4. Use DG202 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 200Ohm. Please refer to the datasheets for 16 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. This multiplexer would work with 20μA current. A voltage higher than 100μA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. The voltage should be at least 4.5V if you are using dual power supplies. The electronic component can function from 15V.

DG202CSE+T Features

1 Channels
Switch Circuit: SPST - NO
20μA Supply Current

DG202CSE+T Applications

There are a lot of Maxim Integrated DG202CSE+T Analog Switches & Multiplexers ICs applications.

• High reliability control systems
• Audio and video signal routing
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Ultrasound
• PCMCIA cards
• Microwave transmission systems
• DVD-R
• Multi-Line E1 Interface Cards
• Intelligent PBX
• Relay replacements