Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG211CUE+

DG211CUE+

DG211CUE+

Maxim Integrated

1μs, 500ns SPST - NC 175Ohm Analog Switches BREAK-BEFORE-MAKE DG211 16 Pins 5nA 15V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

DG211CUE+ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 175Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 755mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 0.65mm
Base Part Number DG211
Output SEPARATE OUTPUT
Pin Count 16
Operating Supply Voltage 15V
Number of Channels 1
Number of Circuits 4
Operating Supply Current 20μA
Nominal Supply Current 20μA
Max Supply Current 400μA
Throw Configuration SPST
Turn On Delay Time 1 μs
Supply Type Dual
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 500 ns
Max Dual Supply Voltage 18V
On-State Resistance (Max) 175Ohm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 70 dB
Current - Leakage (IS(off)) (Max) 5nA
Channel Capacitance (CS(off), CD(off)) 5pF 5pF
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 1μs, 500ns
Crosstalk -90dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 1000ns
Normal Position NC
Voltage - Supply, Dual (V±) ±4.5V~18V
Height Seated (Max) 1.1mm
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $4.70000 $4.7
500 $4.653 $2326.5
1000 $4.606 $4606
1500 $4.559 $6838.5
2000 $4.512 $9024
2500 $4.465 $11162.5
DG211CUE+ Product Details

DG211CUE+ Overview


Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operation at a temperature around 0°C~70°C TA. 16 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. The electronic part body is injected with 16 pins. SPST - NC switching circuits are used in these analog switch ics. It consists of 4 circuits. Try searching for DG211 variants of the analog switch ic. In this multiplexer, the internal resistance is 175Ohm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. Analogue multiplexers of the Dual supply type that are cost-effective. For this digital switch to work, 20μA current would suffice. Put voltage above 400μA on the multiplexer to cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 18V. The voltage should be at least 4.5V if you are using dual power supplies. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. A voltage of 15V can be used to operate the electronic component.

DG211CUE+ Features


1 Channels
Switch Circuit: SPST - NC
20μA Supply Current

DG211CUE+ Applications


There are a lot of Maxim Integrated DG211CUE+ Analog Switches & Multiplexers ICs applications.

  • Industrial and process control systems
  • Sample-and-hold systems
  • Routers
  • Frame Relay Equipment
  • Microprocessor Controlled Analog Systems
  • Cellular phones
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Low-Voltage
  • Intelligent PBX
  • High-Voltage

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News