SN74LVC2G66DCTR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). The advanced packaging method Cut Tape (CT) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 8. A electrical component with 2 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 2.3V voltage supply. It is injected into the electrical part body with 8 pins. Multiplexers built on a SPST - NO switching circuit are built. 74LVC2G66 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. To find out what the 8 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexers or Switches. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 1.65V. In order to operate this switch device, it would need a current of 10μA. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 1μA. There are various bandwidths available for data transfer. Drain to Source resistance is 12.5Ohm.

SN74LVC2G66DCTR Features

2 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz
Drain-to-Source resistance: 12.5Ohm

SN74LVC2G66DCTR Applications

There are a lot of Texas Instruments SN74LVC2G66DCTR Analog Switches & Multiplexers ICs applications.

• Data Acquisition Systems
• Channel Banks
• Frame Relay Equipment
• Audio and video signal routing
• Digital cross connects (DSX-1)
• DVD-R
• SDH
• High reliability control systems
• Intelligent PBX
• Switching Systems