Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG212CSE+

DG212CSE+

DG212CSE+

Maxim Integrated

1μs, 500ns SPST - NO 175Ohm Analog Switches BREAK-BEFORE-MAKE DG212 16 Pins 5nA 15V 16-SOIC (0.154, 3.90mm Width)

SOT-23

DG212CSE+ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 175Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 696mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number DG212
Pin Count 16
Operating Supply Voltage 18V
Power Supplies 5+-15V
Number of Channels 4
Nominal Supply Current 20μA
Max Supply Current 20μA
Throw Configuration SPST
Turn On Delay Time 1 μs
Supply Type Dual
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 500 ns
Max Dual Supply Voltage 18V
On-State Resistance (Max) 175Ohm
Min Dual Supply Voltage 4.5V
High Level Output Current 20mA
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 70 dB
Current - Leakage (IS(off)) (Max) 5nA
Channel Capacitance (CS(off), CD(off)) 5pF 5pF
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 1μs, 500ns
Crosstalk -90dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 1000ns
Drain to Source Resistance 175Ohm
Normal Position NO
Voltage - Supply, Dual (V±) ±4.5V~18V
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $9.820227 $9.820227
10 $9.264365 $92.64365
100 $8.739967 $873.9967
500 $8.245251 $4122.6255
1000 $7.778539 $7778.539
DG212CSE+ Product Details

DG212CSE+ Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around 0°C~70°C TA. The total number of terminations is 16. This electronic part offers high-quality output due to its 4 channels. A 15V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the body of the electronic part. A SPST - NO switching circuit is used for these analog switches. Look for analog switch ic variants by searching with DG212. A 175Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. The digital multiplexer has a low cost Dual supply. A voltage higher than 20μA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 18V. You should attach at least 4.5V voltage if you are using dual power supply. This electrical part is compatible with 18V operating voltages. Resistivity from Drain to Source is 175Ohm for this electronic part.

DG212CSE+ Features


4 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 175Ohm

DG212CSE+ Applications


There are a lot of Maxim Integrated DG212CSE+ Analog Switches & Multiplexers ICs applications.

  • Video signal routing
  • Data switching
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • Access Concentrators
  • Audio and video routing
  • Avionics test equipment
  • Cable Modem
  • Central office
  • Channel Banks
  • Cell phones

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News