DG408CUE+T Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. There are 1 circuits in this multiplexer. Try searching with DG408 if you're looking for variants. There is 100Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 30V should not normally be supplied to the switches. 5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 500μA current would be sufficient. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 5V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. 28V operating voltages are supported by the electronic component.

DG408CUE+T Features

8 Channels
500μA Supply Current

DG408CUE+T Applications

There are a lot of Maxim Integrated
DG408CUE+T Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems