DG409AK/883B Overview

Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. A 8 channel electronic part produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. Based on SP4T switching circuits, these analog multiplexers work. There are 2 circuits in this multiplexer. There is 100Ohm internal resistance in this digital multiplexer. Datasheets for functions of 16 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 30V. There should be 4.5V voltage fed to the electrical part below 4.5V. The switch device would be able to operate with 500μA current. Despite this switch's dual supply capability, its voltage should not exceed 20V. A dual power supply should have at least 4.5V voltage attached. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. Operating voltages of 28V are compatible with the electrical part.

DG409AK/883B Features

8 Channels
Switch Circuit: SP4T
500μA Supply Current

DG409AK/883B Applications

There are a lot of Maxim Integrated DG409AK/883B Analog Switches & Multiplexers ICs applications.

• Data Acquisition Systems
• Residential Gateways, Home Gateway/Router
• PDH Multiplexers
• Modems
• Multiplexers
• Cross Connects
• E1 Multiplexer
• Audio and video switching
• Precision instrumentation
• Precision test equipment