DG411MY/PR Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 16. The electrical component body receives 16 pins. A SPST - NC switching circuit is used to build these analog multiplexers. A 4 circuit is present in this switch device. Using the DG411 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 45Ohm. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 20V to a switch device. 4.5V should be the lowest voltage fed to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 100mA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. In the case of dual power supplies, you should connect at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.

DG411MY/PR Features

Switch Circuit: SPST - NC

DG411MY/PR Applications

There are a lot of Maxim Integrated DG411MY/PR Analog Switches & Multiplexers ICs applications.

• Precision instrumentation
• Signal routing between systems
• Avionics and Military Systems
• SDH
• Multiplexers
• Modems
• Mechanical reed relay replacement
• Data Acquisition Systems
• Battery Powered Systems
• Medical