DG413ETE+ Overview

Due to its 16-WQFN Exposed Pad packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. A SPST - NO/NC switching circuit is used to build these analog multiplexers. There are 4 circuits in this switch device. Look for analog switch ic variants by searching with DG413. As far as internal resistance is concerned, it has 35Ohm. The functions of 16 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 30V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 10V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.

DG413ETE+ Features

Switch Circuit: SPST - NO/NC

DG413ETE+ Applications

There are a lot of Maxim Integrated DG413ETE+ Analog Switches & Multiplexers ICs applications.

• Communication systems
• Multi-Line E1 Interface Cards
• Microprocessor Controlled Analog Systems
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Channelized and Unchannelized DS3 applications
• Audio/video switches
• ATM
• Remote Powered Equipment
• Automatic test equipment
• Fiber to the Home