MAX394CWP+ Overview

The electronic component is convenient to ship overseas because it is packed in a 20-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. The total number of terminations is 20. As a result of its 4 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 20 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. Use MAX394 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 35Ohm. Datasheets for functions of 20 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 16V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 2.7V should be applied to the electronic component. This multiplexer would work with 1μA current. If you put voltage higher than 60nA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. A dual power supply should have at least 2.4V voltage attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. A voltage of 8V can be used to operate the electronic component.

MAX394CWP+ Features

4 Channels
Switch Circuit: SPDT
1μA Supply Current

MAX394CWP+ Applications

There are a lot of Maxim Integrated
MAX394CWP+ Analog Switches & Multiplexers ICs applications.

• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems