DG508ADJ+ Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. An injection of 16 pins is performed into the body of the electrical component. The circuits in this analogue multiplexer number 1. Using the DG508A search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 300Ohm. To find out what the 16 pins do, please refer to the datasheets. Multiplexers should not be powered above 36V in normal situations. The analog switch ic is of the Dual supply type and is cost-effective. There should be 9V voltage fed to the electrical part below 9V. The analogue multiplexer could operate on 200μA current. There is no problem with using dual supply voltage, but it should not exceed 18V. In the case of dual power supplies, you should connect at least 4.5V. It can operate from 15V operating voltages.

DG508ADJ+ Features

8 Channels
200μA Supply Current

DG508ADJ+ Applications

There are a lot of Maxim Integrated DG508ADJ+ Analog Switches & Multiplexers ICs applications.

• Routers
• Intelligent PBX
• Signal routing between systems
• ATM
• Power routing
• Multi-Line E1 Interface Cards
• Data switching
• PDAs
• PCMCIA cards
• Medical systems