DS1100LZ-125+T Overview

For cost-effective packaging, Tape & Reel (TR) is used. By using the 8-SOIC (0.154, 3.90mm Width) package, applications are no longer required to use additional insulating hardware. In order to ensure reliable performance, 3V~3.6V is supplied with a voltage. As its mounting method, Surface Mount is used. The operating temperature is -40°C~85°C. Taps and steps are configured with 5. The use of related parts with the same base part number DS1100L is universally preferred for a wide range of applications. At DUAL, the terminals are located. For a unique configuration, it is equipped with 8 terminations. When operating, 3.3V receives a supply voltage. It uses the logic type SILICON DELAY LINE. A minimum supply voltage of 3V is acceptable for its operation. Providing a maximum supply voltage of 3.6V is acceptable. There is a mounting in the way of Surface Mount. For specific applications, the supply voltage is 3.3V.

DS1100LZ-125+T Features

Supply voltage at Tape & Reel (TR) volts
operate supply current at 3.3V
with SILICON DELAY LINE bits
With 3.3V I/O

DS1100LZ-125+T Applications

There are a lot of Maxim Integrated
DS1100LZ-125+T Delay Lines Timing ICs applications.

• Switch Debouncing
• High Vibration, High Acceleration Environments
• Portable and Battery-Powered Equipment
• Clock Synchronization
• Digital Systems
• Embedded Systems
• Utility Meters
• Security Systems
• Network Hubs, Bridges, and Routers
• QDR/QDRII Memory Systems