MAX1135BEAP+ Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 20-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 1 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 150k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 3.135V~3.465V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX1135 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Analog, Digital number.The supply/digital voltage of this electrical AD converter is 3.135V~3.465V.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 3.465V.It operates with the minimal supply voltage of 3.135V.The maximal analog input voltage of this electrical AD converter is 2.048V.The ADC converter operates from 3.3V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 26.4mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 150 ksps.The minimal analog input voltage of this electrical AD converter is -2.048V.

MAX1135BEAP+ Features

1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 3.135V
3.3V power supplies

MAX1135BEAP+ Applications

There are a lot of Maxim Integrated MAX1135BEAP+ ADC applications.

• Multiplexed Data Acquisition Systems
• Music recording
• Uninterrupted Power Supplies
• Scientific instruments.
• Data Acquisition Systems
• Medical Imaging
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• In-building wireless telephony
• Cell Phones
• 3-phase power control