MAX14752EUE+T Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. 8:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. In total, 16 terminations have occurred. Due to its 8 channels, the electrical component produces high-quality output. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with MAX14752. In this multiplexer, the internal resistance is 130Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 72V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 20V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 270μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 36V. With dual power supplies, you should attach at least 10V. A voltage of 36V can be used to operate the electronic component.

MAX14752EUE+T Features

8 Channels
270μA Supply Current
-3db Bandwidth: 20MHz

MAX14752EUE+T Applications

There are a lot of Maxim Integrated MAX14752EUE+T Analog Switches & Multiplexers ICs applications.

• Precision instrumentation
• Intelligent PBX
• Public switching systems
• SONET
• High-Voltage
• Data switching
• Microprocessor controlled systems
• New designs requiring multiplexer functions
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Sample hold systems