MAX14757EUE+T Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. The analog switch ics are built using SPST - NO switching circuits. Circuits number 4 make up this analogue multiplexer. Try searching with MAX14757 if you're looking for variants. It has an internal resistance of 10Ohm. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 70V volts for the multiplexer. The lowest voltage the electronic part should receive is 10V. For this switch, a dual supply voltage is feasible, but it must not exceed 35VThe voltage should be at least 10V if you are using dual power supplies. Integrated with an analog IC DPDT. It can operate from 35V operating voltages.

MAX14757EUE+T Features

Switch Circuit: SPST - NO
-3db Bandwidth: 145MHz

MAX14757EUE+T Applications

There are a lot of Maxim Integrated MAX14757EUE+T Analog Switches & Multiplexers ICs applications.

• Cable Modem
• SDH/SONET multiplexers
• CSU
• PBX interfaces
• Microprocessor Controlled Analog Systems
• DSUs
• Wireless Local Loop
• Multiplexers
• Channel Banks
• Frame Relay Equipment