MAX16004ETP+ Overview

There are 20 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tube, power management is easy to use. Please refer to this PMIC for 1 functions. Power management consists of 6 channels, each of which can be used independently. As a reference, this IC power includes 20-WFQFN Exposed Pad functions for your convenience. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. In a 3.3V supply voltage, the power management conducts. When a supply voltage of 6 is applied to the power ic, it conducts. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 20 pins on the board. Pin count of the power management is 20. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 50μA. The other features include, for example, [0], which is just one example. It is always advisable to use MAX16004, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 2.5/5V watts is required for the operation of this power management.

MAX16004ETP+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current

MAX16004ETP+ Applications

There are a lot of Maxim Integrated MAX16004ETP+ Voltage Supervisors applications.

• Multi-voltage system
• Functional modules
• Kitchen appliances
• Unattended substation automation
• Power communication system
• Digitally controlled LDO regulators circuit
• WiFi router
• Automotive power systems
• External alarm
• Detection of phase imbalance