Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX16038PLA31+T

MAX16038PLA31+T

MAX16038PLA31+T

Maxim Integrated

8 Terminals 8-Pin MAX16038 Voltage supervisor1 Channels Min 0V Max 5.5V

SOT-23

MAX16038PLA31+T Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-WFDFN
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 380.6mW
Technology BICMOS
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.5mm
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number MAX16038
Output Open Drain or Open Collector
Pin Count 8
Qualification Status Not Qualified
Power Supplies 2.5/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 0V
Operating Supply Current 22μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 3.08V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Supply Current-Max (Isup) 0.05mA
Min Reset Threshold Voltage 3V
Max Reset Threshold Voltage 3.15V
Undervoltage Threshold 3V
Overvoltage Threshold 3.15V
Length 2mm
Width 2mm
RoHS Status ROHS3 Compliant
MAX16038PLA31+T Product Details

MAX16038PLA31+T Overview


There are 8 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached 8-WFDFN functions for your reference in this IC power. There are a lot of similarities between this IC management and other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. There are 8 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 22μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX16038, the base power ics number. A power supply of 2.5/5V watts is required for the operation of this power management.

MAX16038PLA31+T Features


Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current

MAX16038PLA31+T Applications


There are a lot of Maxim Integrated MAX16038PLA31+T Voltage Supervisors applications.

  • Important electronics for automotive protection
  • Satellite navigation
  • DVR
  • Detection of phase loss
  • Radio
  • Automotive permanent magnet synchronous motors
  • WiFi router
  • Military electronics
  • DC stabilized power supply module
  • Dash board

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News