MAX16055GAUB+ Overview

This voltage supervisor has a total of 10 mounting terminals that can be used for mounting. It is packaged with Tube. Power management is possible to find a series of 1 functions. There are a total of 6 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 6-voltage supply. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. 10 pins are present in total in this power management. Pin count of the power management is 10. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 55μA is the recommended value. There are other features such as MANUAL RESET INPUT to name a few. It is always advisable to use MAX16055, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX16055GAUB+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
55μA operating supply current

MAX16055GAUB+ Applications

There are a lot of Maxim Integrated MAX16055GAUB+ Voltage Supervisors applications.

• Satellite navigation
• Stable power system
• Smartphones
• Detection of phase imbalance
• Important electronics for automotive protection
• Multi-voltage system
• Embedded computing
• Power distribution systems of CCU
• Leakage protection
• Microcontroller system