MAX16072RS18D3+T Overview
There are 4 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this PMIC includes 4-WFBGA, CSPBGA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. There are 4 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. You can always use MAX16072, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX16072RS18D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
MAX16072RS18D3+T Applications
There are a lot of Maxim Integrated MAX16072RS18D3+T Voltage Supervisors applications.
- Stable power system
- Digitally controlled LDO regulators circuit
- DSP
- Solar power charger
- Display equipment
- Unattended substation automation
- DVR
- Electronics installed in the vehicle
- Detection of phase imbalance
- Fire equipment power monitoring system
