Name: MAX6451UT23L+T
Brand: Maxim Integrated
SKU: MAX6451UT23L+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Type	Multi-Voltage Supervisor
Terminal Finish	Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	696mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.6V
Terminal Pitch	0.95mm
Base Part Number	MAX6451
Output	Push-Pull, Totem Pole
Pin Count	6
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	7μA
Adjustable Threshold	YES
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	2.313V Adj
Number of Voltages Monitored	2
Reset Timeout	140ms Minimum
Threshold Voltage	+2.32V
Height Seated (Max)	1.45mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX6451UT23L+T Product Details

MAX6451UT23L+T Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. There are SOT-23-6 functions included in this PMIC so that you can refer to them. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. When 3.6V is applied to the power ic, it conducts. In a 2 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 6 pins that are attached to IC management. There are 6 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 7μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6451, which is the base power ics number.