150ns, 100ns DPST - NO 35Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX305 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
MAX305ESE Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Number of Pins
16
Operating Temperature
0°C~70°C TA
Packaging
Tube
Published
1995
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
35Ohm
Terminal Finish
Tin/Lead (Sn85Pb15)
Additional Feature
ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
2
Supply Voltage
15V
Time@Peak Reflow Temperature-Max (s)
20
Base Part Number
MAX305
Output
SEPARATE OUTPUT
Pin Count
16
Power Supplies
5+-15V
Number of Channels
2
Number of Circuits
2
Max Supply Voltage
30V
Min Supply Voltage
10V
Voltage - Supply, Single/Dual (±)
10V~30V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)
-15V
Max Dual Supply Voltage
20V
On-State Resistance (Max)
35Ohm
Min Dual Supply Voltage
4.5V
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
72 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
12pF 12pF
On-state Resistance Match-Nom
0.5Ohm
Switch Circuit
DPST - NO
Switch Time (Ton, Toff) (Max)
150ns, 100ns
Charge Injection
10pC
Channel-to-Channel Matching (ΔRon)
500m Ω
Crosstalk
-90dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
150ns
Switch-off Time-Max
100ns
Normal Position
NO
Height Seated (Max)
1.75mm
Length
9.9mm
Width
3.9mm
Radiation Hardening
No
RoHS Status
Non-RoHS Compliant
MAX305ESE Product Details
MAX305ESE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there are 16 terminations. High-quality output is provided by the electronic component's 2 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Based on DPST - NO switching circuits, these analog multiplexers work. There are 2 circuits in this switch device. Try searching with MAX305 to find analog multiplexer variants. A 35Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 30V voltage to the switch device. It is recommended that the electrical component receives a voltage of 10V. There is no problem with using dual supply voltage, but it should not exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Don't miss this electronic component's additional features, such as: ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY.
MAX305ESE Features
2 Channels Switch Circuit: DPST - NO Additional Features: ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY
MAX305ESE Applications
There are a lot of Maxim Integrated MAX305ESE Analog Switches & Multiplexers ICs applications.
High reliability control systems
DVD-R
E1 Multiplexer
Signal routing between systems
E1 Network Equipment
Intelligent PBX
Industrial
Existing multiplexer applications (both fault-protected and nonfault-protected)