MAX31091AUA/V+033 Overview

The Tube method is used for packaging clock ICs. This clock generator is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. In it, there are 8 terminations to be found. For this clock generator ic, a voltage of 3.3V is required. Clock is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 3.6V of power. A maximum voltage of 3V should be used for this frequency generator for safety reasons. This clock PLL works with a supply voltage of 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to -40°C~125°C. The related electronic parts of part number MAX31091 are listed below. The frequency generator is equipped with 8 pins. This clock generator is a member of Automotive, AEC-Q100, EconOscillator? series. High efficiency is achieved when operating at a frequency of 33.3MHz. ANALOG CIRCUIT-RF synthesizers are analog integrated circuits that can be classified as analog ICs.

MAX31091AUA/V+033 Features

Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V

MAX31091AUA/V+033 Applications

There are a lot of Maxim Integrated MAX31091AUA/V+033 Clock Generators applications.

• Automatic test equipment
• Digital HDTV systems
• VSAT (Small Ground Satellite Station)
• Carrier synchronization in wired communication
• High-speed optical transport network (OTN)
• Remote telemetry and instrumentation
• Digital logic circuits
• Multiplexing communication
• Infotainment systems
• Quenching?